The Easy Mark The Easy Mark drilling jig will help you align and drill the hardware mounting holes for knobs and handles quickly, precisely and with absolute repeatability. And, when you finish, all handles and knobs will be in perfect alignment with one another...a sight to behold! If you're still measuring, marking and drilling large numbers of mounting holes without the aid of a device like this, you're wasting a lot of valuable time. Here's how it works: Rest the raised ledge on the back side of the Easy Mark on the top edge of the drawer front. Slide the horizontal stop all the way to the right and center the device on the drawer front, using the left and right half-scales as indicators. Slide the stop to the left until makes contact with the right side of the drawer front and tighten. Adjust drill bushings (3" to 4-1/2" on-center) to match hardware mounting holes and tighten. Loosen the locking knob on the drill bushing block...slide it vertically to your desired position...and re-tighten the locking knob. Use a 3/16" twist drill bit in the applicable hardened bushings to bore mounting holes. Move the Easy Mark to the next drawer and repeat the process
Price:	$59.99
Quantity:

	Easy Bore Our hand-clamped boring jig drills a 35mm hole and two aligning 8mm holes at the same setting, which allows you to accurately install your hinges with ease and speed. No screwdriver is needed to install, just a hammer to lightly tap the hinges in place. The hinges have special plastic inserts around screws which stay imbedded in wood; hinge can then be unscrewed if needed while finishing etc. The jig has adjustable stops which allow for different overlays. We use setting number 2 for 1/2" overlay, number 3 for 3/8" overlay. The cast aluminum alloy frame also incorporates a dept-adjustable carbide-tipped 35mm bit with spurs for clean holes in solid wood, veneers or melamine. The Easy Bore is a strong, versatile unit for shops of all sizes!
Price:	$179.99
Quantity:

	Pocket Cutter The applications of the 3 n 1 Pocket Cutter are virtually endless. From 45 degree joints, beveled joints, 90 degree joints and more. The Pocket Cutter will help you do it stronger, faster and easier. Whether you are a hobbyist, beginner or a professional woodworker you will enjoy the ease and simplicity of the Pocket Cutter.
Price:	$69.99
Quantity:

	Shelf-Pin Jig Get perfectly, consistent spaced and centered shelf-pin holes. Economical and practical, this jig can be used on assembled or unassembled cabinetry. Ideal for adding shelves to new or existing cabinets. Drills holes either 3/4" or 1-7/16'' or 2-1/2'' from edge. Watch video below for more details.
Price:	$32.99
Quantity: